Comprehensive Heating Care for Every Marietta Home
Marietta winters play a strange trick on homeowners. Most days are mild enough that the heater barely runs, but then a sudden cold snap blows into town and all the furnaces throughout Cobb County suddenly have to work harder than they have in months. That start-and-stop, dormant-then-demanded pattern is tough on equipment that isn’t well-maintained, and it’s a big reason so many of our service calls come in right after the first real freeze of the season.
Whether you’re in Marietta, Smyrna, or Atlanta, we always strive to deliver “small town integrity in the big city”, and that shows in every one of our heating services in Marietta, GA. Our full service area also covers Cobb County and Northwest Atlanta, including Mableton, Kennesaw, most of Acworth, Sandy Springs, Vinings, Buckhead, and Brookhaven. Every technician we send out is NATE-certified, background-checked, and routinely drug-tested, and they’ll show up in a marked Bartlett van and uniform carrying a Bartlett business card, so you always know who’s in your home.
The Heater Services We Deliver to Marietta Homeowners
Whether your system is a furnace, a standalone heater, or a heat pump, our team handles the full range of heating services in Marietta, GA, from small repairs to complete replacements.
Heater Repair
Not every home in Marietta uses a typical forced-air furnace. Some rely on a more generalized heating unit, and even if you call it a “heater” when it’s technically a furnace, our HVAC experts can still diagnose and fix the problem. Reach out by phone or form to schedule residential heating services in Marietta, GA, with a team homeowners have trusted for decades.
Heater Replacement
Eventually, even the best heater will break down and need to be replaced. Finding the right unit for your home takes the knowledge of a true HVAC professional, and as a resident within Bartlett’s service area, you’ve got one just a call away.
Heater Maintenance
Every heater needs to be routinely maintained, no matter what type it is. Regular visits help confirm everything is functioning as intended and catch early signs of trouble before they become bigger problems. Give us a call to learn more about our heater maintenance offerings in Marietta.
Furnace Repair
Any time the heat goes out, everyone hopes it’s something simple, like a loose wire, a bad fuse, or a quick cleaning. Sometimes it is. When you need a furnace repair, large or small, our Marietta-area technicians get the job done, from filter replacement to a full furnace overhaul, and it’s just one part of the broader furnace services in Marietta, GA we provide.
Furnace Installation
Building a new home in Smyrna, Marietta, or Atlanta, or adding a furnace in the attic or garage? Installing a new furnace isn’t a DIY project. It takes a real understanding of combustion and technical training our team brings to every job.
Furnace Replacement
Your furnace may have made it well past its 10-15-year life expectancy before something finally gave out. Once it reaches double digits, it’s usually smarter to replace it and take advantage of newer technology and lower utility bills. We’re the local team that can help you make that call.
Furnace Maintenance
Regular visits from an HVAC professional are the best way to give your furnace a long life. It helps you spot problems before the weather turns cold and can save money on utility bills. Schedule regular tune-ups to keep your system running efficiently and avoid costlier repairs down the road, which is a core piece of our furnace services in Marietta, GA.
Heat Pump Service
Though furnaces are the most common way to heat a home in Metro Atlanta, they’re not the only option. Our technicians help you find, install, and maintain the right heat pump system for your family, offering a full range of heater services in Marietta, GA, built around whatever equipment you already have or want to switch to.
Heat Pump Repair
Heat pumps are among the most efficient and popular HVAC systems, but year-round use can still lead to small component failures. If yours goes out, our heat pump repair experts are ready to help.
Heat Pump Installation
From sizing to placement, our team handles every part of a new heat pump installation so it runs efficiently from day one, backed by the same standards behind all our furnace services in Marietta, GA.
Heat Pump Replacement
When a heat pump reaches the end of its lifespan, we’ll walk you through the best replacement options for your home and budget.
Heat Pump Conversion
Want to save money on energy bills while going a little greener? Replacing an existing AC unit with a heat pump is a straightforward process that may make you eligible for rebates. We’re proud to offer heat pump conversion throughout the Marietta area.
Heat Pump Maintenance
Like any HVAC equipment, heat pumps need regular service to perform at their best. During a maintenance visit, our technician checks airflow, looks for leaks, and inspects the unit for potential failure points, making any recommendations along the way. If you want your heat pump to last, consider scheduling this alongside your other heating services in Marietta, GA.
The Anatomy of Your Home Heating System
Understanding what’s actually inside your equipment can help you get more out of every one of our residential heating services in Marietta, GA.
Here’s a breakdown of the parts you’ll find in most heating systems:
- Blower: Pushes heated air from your furnace throughout the rest of the home. If this part breaks, the unit will be on, but the vents won’t be active.
- Blower Motor: Powers the fan in the blower. Without it, air wouldn’t reach more than a foot or two from the unit.
- Blower Chamber: Houses the blower and blower motor, stabilizing them against the force and vibration they generate.
- Combustion Chamber: Holds the entire firing system and is kept separate from the blower chamber for safety.
- Heat Exchanger: One of the most important parts of a modern furnace. Gases created by the ignition process are piped into the heat exchanger, which warms and transfers that heat to the air flowing over it before the drained combustion gases exit through the flue pipe.
- Burner: Where oxygen meets gas or an electric spark to create the flame that kickstarts the heating process.
- Burner Cover: Covers the flame sensor, blower chamber, and ignitor, keeping flames contained inside the furnace.
- Flame Sensor: Detects when the burner catches fire. If there’s an issue with the burner, the sensor shuts the unit off, preventing carbon monoxide leaks.
- Ignition System: Older furnaces have pilot lights that stay lit and ready to start the system. Newer units, generally anything made after 2010, use an electronic ignitor instead, which can’t be blown out by a gust of wind the way a pilot light can.
- Limit Switch: Reads the temperature inside your furnace and shuts it off if it gets too hot. You’ll typically find it under the supply plenum, and it’s sometimes called a fan limit or furnace high limit switch.
Electric vs. Gas Heating: Which Is Right for Your Home?
Which fuel source is best for your home depends on several factors.
Here’s a quick comparison:
- Air Quality: Electric heating systems provide better air quality than their gas counterparts.
- Safety: No flammables or gases means less risk to your family.
- Speed: Gas heaters generally reach temperature quicker.
- Extreme Weather: If your power gets knocked out by winter weather, electric furnaces can’t function, but gas units can still provide warmth.
- Lifespan: Electric furnaces in Marietta tend to last slightly longer than gas ones.
- Maintenance: Gas furnaces require more maintenance overall.
- Cost: Electric heaters are less expensive to install but cost more to operate.
Simple Ways to Cut Your Winter Heating Costs
The most obvious way to reduce heating bills in Marietta is to install a new heating system, but it’s not the only option.
You can also:
- Lower your thermostat: Turning it down 10 degrees can reduce energy use by roughly a third. If that’s too cold to stomach, each degree saves around three percent.
- Get rid of air leaks: Heat often escapes through holes in your home or ductwork, and in older homes this accounts for between 25 and 40 percent of all heat lost. Sealing these leaks prevents drafts and lowers energy bills.
- Service your heating system: Yearly tune-ups are a great way to lower your heating budget. During these visits, our Marietta HVAC technicians clean your boiler or furnace so it operates more smoothly and efficiently.
- Install better insulation: Insulation is one area where home builders often cut costs, and you might be surprised by how cost-effective reinsulating your home can be. We suggest calling a local Marietta insulation contractor for a better idea of the savings you can expect.
- Cover your windows: The Department of Energy estimates that 30% of all heat is lost through windows. Old ones should be replaced, but even newer ones can leak warmth. Adding floor-length curtains helps keep the warmth from your heating system inside.
- Check the vents: Take off the plates and clean out any dust. This simple step lets heat flow more easily and evenly throughout your home.
Frequently Asked Questions
How often should I replace my furnace filter?
A key part of maintaining your heating system’s performance and efficiency is regularly changing the air filter. If you have a standard 1-inch filter, changing it once a month is advised. For 4-inch filters, manufacturers recommend waiting six to nine months between replacements. If you have shedding pets in your household, check more frequently. The best way to tell if it’s time for a new one is to look at it. If it’s more gray than white, it’s likely time to swap it out.
Do I really need furnace maintenance in Marietta?
We suggest having your heater or furnace examined regularly. A lot of heating failures happen because this vital part of homeownership gets ignored in favor of a “fingers-crossed” approach. During your inspection, our HVAC expert looks for signs of damage, cleans away dust, and tests electrical components. From improved efficiency to manufacturer warranty requirements, there are few better ways to protect your heating system. Reach out to us to schedule your furnace tune-up in Marietta.
Which brands of furnaces and heating products does Bartlett Heating & Cooling work with?
Our heating experts work with all brands of HVAC equipment, including Coleman, Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Daikin, Fujitsu, Mitsubishi, Frigidaire, Gibson, Goodman, Maytag, Weil McLain, American Standard, General, and Dynamic.
What do I do if my heat goes out?
Is power getting to your furnace or heater? Check if a fuse or circuit breaker tripped, and make sure your power switch is in the ON position. When was the last time you swapped out your filter? If it’s been a while, try installing a new one first, since that can solve a lot of heating problems. Verify your thermostat is set to “heat” and not “cool.” If the display is dim, try swapping out the batteries on the back of the unit. Check for snow or other debris blocking your outdoor vent, and remove the obstruction if you find any. If you still don’t have heat, it’s time to contact us for heater services in Marietta, GA.
How much does a new furnace cost in Marietta?
The cost of a furnace installation depends on several factors, including the type of furnace being installed, how much extra work is involved, and how large a furnace you’ve chosen. Your home may also have two units, which can raise the cost, and it’s a common question we field before quoting residential heating services in Marietta, GA.
Your customer service representative referenced a “No-Heat Call.” What is that?
A no-heat call is an industry term referring to a customer with a complete lack of heating power. This is one of the most common calls we get for heating repairs in Marietta. The furnace, boiler, or heater is producing no heat whatsoever for one reason or another. Because these scenarios can be uncomfortable, especially during Marietta’s cooler seasons, we prioritize these appointments on our schedule.
What should I do with my heating system if I’m going on a long trip?
The last thing you want to think about on vacation is your home’s heating system. Some people turn off their furnace or boiler before they leave, but this is the wrong approach. Letting your home get too cold could burst pipes or damage appliances, walls, and photos. To both save on costs and protect your home, set your thermostat around 55 degrees, a little warmer if you have pets. Just don’t forget to switch your thermostat to “vacation” or “hold” mode before you head out the door.
Why is one room cold and the other warm?
Heat inconsistencies like this are often the result of airflow problems. Blocked vents, improper heating system design, and leaky ductwork are frequently to blame. While you can try to DIY a fix, it’s often better to leave it to a Marietta HVAC specialist who can properly diagnose the airflow issue.
What’s an AFUE rating?
AFUE stands for Annual Fuel Utilization Efficiency. This rating tells you how effectively a water heater, furnace, or boiler converts its fuel into heat. The higher the number, the more efficient the heating system. This number comes from dividing the unit’s annual energy output by its input, and the government sets acceptable minimum AFUE standards that are subject to periodic review and change.
What’s an efficiency rating?
AFUE is one example of an efficiency rating. Other common ones include the seasonal energy efficiency ratio (SEER2), heating seasonal performance factor (HSPF2), and energy efficiency ratio (EER2). Regardless of which measurement is used, these ratings all serve the same purpose: telling you how well a heating system heats a space and how much energy it uses doing it.
Should I turn off vents in rooms I’m not heating?
A lot of homeowners think closing off vents saves energy, but it doesn’t.
In fact, this can:
- Cause undesirable pressure changes in your ductwork
- Lessen overall heating system efficiency
- Worsen existing air leaks
- Aid mold growth due to misdirected warmth
- Result in heat exchanger damage
Instead of shutting vents, try opening doors between rooms. If a room is too hot and your home isn’t zoned, you can slightly close the vent rather than closing it fully.
How do I tell what kind of heating system I have?
The easiest way to tell is by looking at how the heat is delivered. You have a boiler if you see radiators and water pipes coming from your unit. If you have ducts or vents, your Marietta home is heated by a furnace or a heat pump, though ductless heat pumps also exist. If you’re still not sure, ask our technician during your next heating system tune-up.
Is it bad to run my heating system at high temperatures?
Most modern furnaces can’t be set above 90 degrees. This safety measure protects the system by preventing long cycles and overheating, which protects vital components like the heat exchanger. Your heating system likely also has a high-limit switch as an additional safety measure that shuts the unit off if the furnace’s interior gets too hot. Most Marietta HVAC experts recommend setting your thermostat no higher than 78 degrees.
What’s two-stage heating?
Single-stage heating systems, typically older or more economical, only have one level of heating output. You can adjust the temperature on the thermostat, but it doesn’t change how hard the furnace works. To boost efficiency, many modern furnaces are two-stage, meaning they have a high and low output setting. The high setting kicks in on the coldest days, while the lower setting runs during milder weather. These systems save energy and allow for more even heat distribution, which is why they’re also sometimes called modulating furnaces.
Why does my home get dry when my heating system runs?
Hotter air can hold more moisture than cold air, so as it cycles through your home, heated air pulls water from the environment. The combustion process can also lower your home’s relative humidity, and winter itself tends to be characterized by dry air on top of that. Consider installing a whole house humidifier in Marietta to make things more comfortable. These systems can be directly integrated with your furnace or other heating system.
Schedule Your Services Today!
Whether it’s a quick furnace repair or a full heat pump conversion, Bartlett is ready to help. Give us a call to schedule your heating services in Marietta, GA, and see why homeowners across Marietta, Smyrna, and Atlanta have trusted us since 1989.
Metro Atlanta’s long, muggy summers have made a working AC system less of a luxury and more of a basic requirement. Between the heat and the humidity rolling off the Chattahoochee, many homebuyers here won’t even consider a house that doesn’t have reliable central air already in place. But like any major appliance, an air conditioning unit will eventually break down, and it’s not something the average Marietta homeowner can fix on their own.
